Stage sound manufacturer
★ precision two-stage AB type is adopted in the circuit.
★ delayed startup "soft start" function, closed-loop controlled peak limiter, soft start, overheating protection and short-circuit protection; It has perfect protection circuits for short circuit / overcurrent, overvoltage, overtemperature and amplitude limiting.
★ in terms of power supply, class a iron core of transformer and oxygen free copper enamelled wire are used to make the energy more sufficient and the working temperature lower.
★ the power filter capacitor adopts special audio capacitor, which has less distortion, lower internal resistance, faster and stronger charge and discharge current.
★ the front panel is equipped with power indicator, protection lamp, signal lamp and clipping lamp to display the current working state of the equipment.
★ it adopts fluid mechanics design, reasonable natural air cooling and forced air cooling, ultra silent operation, and can work in a relatively harsh environment.
★ the installation method adopts the standard 19 inch rack width and 2U 9-inch chassis design.
technical parameter
Model: per channel power bridge power mono mode with simultaneous load
8Ω 4Ω 8Ω
PL4200 4x200w 4x350w 2x650w
PG4400 4x400w 4x550w 2x1100w
★ this power is measured according to EA standard
★ this power is measured with 40m pulse 1kHz sine wave under% total harmonic distortion
★ other data are obtained according to qsae12005 standard test
★ the manufacturer reserves the right to interpret the above parameters. The parameters are subject to change without notice. The parameters are subject to the product manual.
★ output power: 1kHz, 0.5% thd + n
★ frequency response: (± 1dB, 1W / 8 Ω) 20Hz / 20KHz
★ total harmonic distortion: thd + H (standard measurement conditions, 1W / 8 Ω / 1kHz) ≤ 0.1%
★ damping coefficient: ≥ 200
★ signal to noise ratio: - 100dB
★ signal input interface: XLR composite plug (6.35), lotus input interface.
★ input sensitivity (rated power 8 Ω): 0.775v/1v/1.4v
★ input common mode suppression: (1kHz) > 60dB
★ resolution: (full power at 8 Ω / 1kHz) ≥ 100dB (1kHz)
★ input impedance (balanced / unbalanced): 20K Ω / 10K Ω
★ output connection: professional output socket connection